Publicidad
Idiomas disponibles
Idiomas disponibles
POWER SWITCH: Turns power to unit on and off. Press the switch into the upright position to turn the unit ON, and press
1
the switch into the downright position to turn the unit OFF.
POWER LED: Glows anytime the unit is connected to an appropriate power source and the unit is turned ON.
2
MIC 1 & MIC 2 INPUTS: Neutrik Combo Connectors accept an XLR jack or 1/4" phono jack. This gives you the advantage
3
of being able to adapt this mixer to any situation and sound system. You can use microphones that come with standard 1/4"
connectors or XLR connectors.
MIC TREBLE CONTROL: Adjusts the high frequency response of MIC 1 and MIC 2. Rotate this knob clockwise to increase
4
the high frequency response, and counterclockwise to decrease it. This gives you a wide variety of sound allowing for special
effects.
MIC BASS CONTROL: Adjusts the low frequency response of MIC 1 and MIC 2. Rotate this knob clockwise to increase the
5
low frequency response, and counterclockwise to decrease it. This gives you a wide variety of sound allowing for special
effects.
MIC LEVEL CONTROL: Adjusts the volume of MIC 1 and MIC 2. Rotate this knob clockwise and you will increase the
6
volume of MICS 1 & 2. Rotate the knob counterclockwise to decrease the volume.
CUE BUTTON: Sends MIC 1 and MIC 2 output to the Cue Mix. Press this button and your microphone can now be monitored
7
in your headphones and booth monitors along with the cue mix.
MIC INDICATOR: Glows to indicate that MIC 1 & MIC 2 are ON. When this LED is glowing you will be able to speak into
8
your microphone and hear it in your program and/or cue mix.
MIC TALKOVER SWITCH: The purpose of the talkover section is to allow the program playing to be muted so that the mic
9
can be heard above the music. The MIC/TALKOVER SWITCH controls MIC 1 and MIC 2 and has three settings. When the
MIC/TALKOVER SWITCH is in the "OFF" position, MIC 1 and MIC 2 and talkover are off. When the MIC/TALKOVER
SWITCH is in the "MIC 1 & 2" position MIC 1 and MIC 2 are on, the MIC INDICATOR will glow, but talkover is off. When
the MIC/TALKOVER SWITCH is in the "TALKOVER" position, MIC 1 and MIC 2 and talkover will be on and the volume of
all sources except the MIC 1 & 2 inputs are lowered by 16 dB.
CUE LEVEL: Adjusts the cue volume without affecting the overall mix. Rotate this knob clockwise to increase the volume of
1 0
the cue mix. Rotate it counterclockwise to decrease the volume.
PEAK HOLD LED METER: Indicates the Master Output left and right channel levels. By viewing this meter, you will be able
11
to optimize your sound quality and eliminate distortion in the system.
CUE PGM PAN CONTROL: By rotating the CUE PGM PAN CONTROL to the left you will be able to monitor the
1 2
assigned cue signal. Rotating to the right will monitor the PGM (program) output.
HEADPHONE JACK: A 1/4" stereo jack allows for the insertion of stereo headphones
1 3
CHANNEL GAIN CONTROL: Adjusts the GAIN for Channels 1, 2, 3, 4. Rotate this knob clockwise to increase the gain to
1 4
the channel. Rotate the knob counterclockwise to decrease the gain to the channel.
CHANNEL HIGH EQ CONTROL: Contour the high frequency response for Channels 1, 2, 3 and 4. Rotate this knob
1 5
clockwise to increase the high frequency response, and counterclockwise to decrease it. This gives you a wide variety of
sound possibilities allowing for special effects.
CHANNEL MID EQ CONTROL: Contour the mid frequency response for Channels 1, 2, 3 and 4. Rotate this knob
1 6
clockwise to increase the mid frequency response, and counterclockwise to decrease it. This gives you a wide variety of
sound possibilities allowing for special effects.
CHANNEL LOW EQ CONTROL: Contour the low frequency response for Channels 1, 2, 3 and 4. Rotate this knob
1 7
clockwise to increase the low frequency response, and counterclockwise to decrease it. This gives you a wide variety of
sound possibilities allowing for special effects.
INPUT SELECT SWITCH: Allows you to select the input source for Channels 1, 2, 3, 4. Select Phono1/Line 1, Line 5,
1 8
Line 6, Line 7, Line 8 or AUX. The level and EQ features will affect only the input that is selected for that channel.
CHANNEL SLIDE/KNOB: Controls the relative levels of each of the four Input mixing Channels (Channels 1, 2, 3, 4).
1 9
CHANNEL CUE ASSIGN BUTTON: Engaging any single or combination of CUE pushbuttons sends any program present
2 0
at the respective Channel's source control SELECT SWITCH to the headphone cue section. The pushbuttons will illuminate
when the switch is engaged.
FEATURE DESCRIPTIONS:
Page 4
Publicidad
