Publicidad
Idiomas disponibles
Idiomas disponibles
1. installation
1.1 Power off the air conditioner, Open the air conditioner
panel as shown in the figure.
1.2 Unscrew WiFi box screws. Different types of air
conditioners,Location of WiFi boxes may be different.
1.3 Insert WiFi module as shown in the figure(The "Smart kit"
is marked face up)
2. App download link
Tips:You can download and install "smart life" by searching
the Apple and Google app stores.
3. Operation instruction
3.1. Register account：
When you open the App for the first time, start your
registration. Tap on "Register" at upper right corner of the
login page, Type in your Email address or mobile number, tap
on "Next" and receive a verification code. Type in the code
and confirm your password, and then tap on "Confirm". After
successful verification, registration process is finished and
App goes to the home page.
3.2. How to add device?
3.2.1 Please make sure that the device is on the pending
status awaiting to be connected. If not, please reset the
device via either of the following two methods:
1. Long press the reset‐button for 5s－ buzzer sounds－
the WIFI icon on device is quickly flashing (approx. 3 times/s).
Then it indicates that the device is successfully reset and has
entered into Smart mode.
2.
Turn
on
the"DISPLAY"button 6 times in 7 seconds‐buzzer sounds‐
the WIFI icon on device is quickly flashing (approx. 3times/s).
Then it means that the device is successfully reset and has
entered into quick connect mode.
3.2.2 Open the App, tap on 【Add device】 , select your own
Wi‐Fi network, type in your own Wi‐Fi router password and
tap on " Next" . Then the network configuration starts.
3.2.3 When configuration is successful, you could see the app
interface as shown in the screenshot below.
3.2.4 Tap on 【Done】 , you could see the interface of a device
list as shown in the screenshot below.
1
the
air
conditioner
and
Press
Publicidad
