Publicidad
Idiomas disponibles
Idiomas disponibles
3.3. What if connection failed?
When the connection failed, you could see the the App
interface as shown in the screenshot below. Please try to
configure network again or switch to AP mode.
3.3.1. Continue to connect by switching other connection
mode.
1.Tap on 【AP mode】 , configure network via AP mode with the
following procedures.
2. Switch Air conditioner to AP mode: When it is under smart
mode, long press
reset‐button for 5 seconds‐buzzer sounds－ the heating icon
on device is slowly flashing (approx. 1.5 times/s). It indicates
the Air conditioner has entered into AP mode
3. Connect to device hotspot: Tap on 【Connect】 (open
phone settings‐WLAN),
connect to the hotspot named "SmartLife‐XXXX" (The name
of WIFI may vary, depending on the actual product), then the
network configuration starts as shown in the screenshot.
4. After successful network configuration, tap on "Done" and
the device list interface appears.
4.WIFI Attentions
4.1 Important notifications
To prevent unnecessary harm, please keep in mind of the
following notifications
Please don't use Wi‐Fi where the wireless device is not
allowed, such as airport,
medical places and etc.
Please don't turn on your smartphone in dangerous places,
such as gas station, fuel or chemicals manufactures, and etc.
Please don't use mismatched devices.
Please find a professional to install and fix the Wi‐Fi.
Please refer to the user manual for the detailed connection
methods, please don't randomly use mismatched devices.
4.2 Notifications：
4.2.1 The App control quality is affected by your smartphone,
Wi‐Fi network,
distance with router, and internet status. Sometime it is not
very smooth. It has
nothing to do with air conditioner itself；
4.2.2 If you find it failed to control with your smartphone,
please check your internet status at first, then check whether
it is successfully connected with air conditioner; If these
circumstances are alright, please delete the device first on
your App and start the procedures all over again from the
step 3.2.
4.2.3 If you still cannot solve the issues with the methods
above, please control the Air conditioner with your normal
remoter and then request for after‐sale service.
2
Publicidad
