Cherubini META Dry Contact Switch 7 Instrucciones página 31

SMARTSTART INCLUSION
Z-Wave SmartStart aims to shift the tasks related to inclusion of an end device into a
TM
Z-Wave network away from the end device itself, and towards the more user-friendly
TM
interface of the gateway.
Z-Wave SmartStart removes the need for initiating the end device to start inclusion.
TM
Inclusion is initiated automatically on power-ON and repeated at dynamic intervals
for as long as the device is not included into a Z-Wave network. As the new device
announces itself on power-ON, the protocol will provide notifications, and the
gateway can initiate the inclusion process in the background, without the need for user
interaction or any interruption of normal operation. The SmartStart inclusion process
only includes authenticated devices.
META Serie 7 devices can be added into a Z-Wave
QR Code present on the product with a controller providing SmartStart inclusion. No
further action is required and the SmartStart product will be added automatically
within 10 minutes of being switched on in the network vicinity.
The SmartStart QR and the full DSK string code can be found on the back of the device.
The PIN is the first group of 5 digits printed underlined. If you plan to use the DSK, it is
important that you take a picture of the label and keep it in a safe place.
S2 SECURE INCLUSION
When adding META Serie 7 devices to a Z-Wave
Security 2 Authenticated (S2), the PIN code of the Z-Wave
required. The unique DSK code is printed on the product label. The first five digits of the
key are highlighted and underlined to help the user identify the PIN code.
network by scanning the Z-Wave
TM
network with a controller supporting
TM
Device Specific Key (DSK) is
TM
Pin Code
31
TM