Cherubini META Dry Contact Switch 7 Instrucciones página 38

OFFLINE SETUP MODE
The device has a unique feature that allows to configure some parameters without using
any user interface. This feature enables the professional user to setup the main features
of the device in the field even if the device is not included in a Z-Wave
the device will be included in the network all these configuration parameters will be
maintained.
To enter in offline setup mode, operate 2 clicks on the integrated button.
When the device is in Offline setup mode the led becomes solid Blue and the following
configurations are permitted:
1 click
2 clicks
3 clicks
After receiving the command the led blinks a number of times equal to the number of
clicks recognized.
6 clicks
Hold down for 5
seconds
After entering in Offline setup mode, the device returns to normal operation if no action
on the switch is detected for more than 20 Seconds.
Setup input type to toggle switch. Equivalent to set parameter
n. 1 to 2.
Activate a switch Off timer of 10 minutes. Equivalent to set
parameter n.30 to 15 and parameter n. 31 to 6000.
Activate a switch Off timer of 5 minutes. Equivalent to set
parameter n. 30 to 15 and parameter n. 31 to 3000.
Exit from Offline setup mode and return to normal operation.
Reset all configuration parameters to their default value and
return to normal operation.
38
Network. When
TM