- English -
Clean the pump
4. Remove pump.
5. Remove screws.
6. Remove the pump housing including its holding
ring, sealing and impeller unit.
using a soft brush, replace damage parts.
7. Reassemble the unit in the reverse order.
of the bottom strainer casing such that the
cable will not be crushed when closing the
Storage/Winterization
Wear parts
The impeller unit is a wearing part and does not fall under the warranty.
Repair
A damaged unit cannot be repaired and must be put out of operation. Dispose of the unit in accordance with the
regulations.
Disposal
Do not dispose of this unit with domestic waste! Disable the unit beforehand by cutting off the cables. Further
information about the recycling of this product can be obtained from your local municipal authority.
6