Publicidad
Idiomas disponibles
Idiomas disponibles
LOADING FASTENERS
ADJUSTING
STAPLE DRIVE
1. Disconnect tool from air supply
using quick-connect coupling.
2. Loosen adjustment screw, and
move tip of lower safety element
up to increase fastener drive, or
move down to de crease
drive. Tighten screw securely.
3. Connect tool to air supply, and
drive staples to check for correct
depth of drive.
4. Make depth of drive adjust ments
as needed to maintain consistent
staple driving.
GRTSM2016C_OwnersManual007_ENGES.indd 11
11
OPERATION
4/19/19 10:47 AM
Publicidad
