Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY
SAFETY INSTRUCTIONS
➡
GRTSM2016C_OwnersManual007_ENGES.indd 6
DO NOT ATTEMPT TO OPERATE THE TOOL
IF THE TOOL'S OPERATING CONTROLS HAVE
BEEN MODIFIED OR ARE NOT WORKING PROPERLY
Attempting to use a tool with modified or malfunctioning
trigger or workpiece contact can result in a fastener
being driven unintentionally.
USE CORRECT FASTENERS
Only use the correct fastener for the tool. Using fasteners
with incorrect specifications can jam the tool or cause
serious injuries.
USE THE CORRECT FASTENERS
FOR THE APPLICATION.
Using the wrong fasteners can cause the workpiece
to split and allow the fastener to fly free.
KEEP TOOL POINTED IN A SAFE DIRECTION
WHEN LOADING FASTENERS
Never point the tool at yourself or anyone else
when loading fasteners.
DO NOT LOAD TOOL WITH TRIGGER OR
WORKPIECE CONTACT DEPRESSED
Depressing the trigger or workpiece contact during loading
can result in an unintentional fastener drive if both devices
are accidentally actuated at the same time.
KEEP FINGER OFF TRIGGER UNTIL TOOL
IS IN POSITION TO DRIVE A FASTENER
An unexpected bump or sudden contact with your body or
that of a bystander can result in serious injuries.
AVOID DRIVING FASTENERS INTO KNOTS,
ON TOP OF OTHER FASTENERS, AT WORKPIECE
EDGES, OR INTO BRITTLE MATERIALS
Driving fasteners into extremely hard materials,
or driving into workpiece edges, can cause fasteners
to deflect away from the workpiece. Flying fasteners
can cause serious injuries.
6
4/19/19 10:47 AM
Publicidad
