Dovre 640WD/V2 Instrucciones De Instalacion Y Uso página 41

= Open
o
Maximum amount of wood
To stoke continuously at the rated power, wood must
be added every 45 minutes. If you use a smaller
amount of wood each time, you can add wood more
often. Each stove is designed to work with a specific
maximum amount of wood. If you use a larger
quantity of wood, the heat output increases. This can
cause the hearth to be overloaded and parts can be
damaged.
Allowable maximum amount of fuel when using wood
with a moisture content of 15%:
640WD/V2 10 kW can be filled with a maximum of
2.3 kg wood every 45 minutes.
760WD/V2 12 kW can be filled with a maximum of
2.7 kg wood every 45 minutes.
Fill the combustion chamber to at most 1/3
capacity.
Avoid excessive smoke development e.g. just
after filling. Sudden ignition of these gases
can cause intense pressure waves/-
explosions. Set the air control to the maximum
position or leave the stove door open slightly
for a while.
Subject to change because of technical improvements
= Closed
l
Burning wood
After you have followed the instructions for lighting:
1. Slowly open the door of the appliance.
2. Spread the charcoal evenly across the bottom of
the stove base.
3. Stack a few logs on the charcoal.
Open stacking
If the logs are stacked openly, the wood will burn
quickly as the oxygen can reach each log easily. If
you want to use the stove for a short while, make an
open stack.
Compact stacking
If the logs are stacked tightly, the wood will burn
more slowly as the oxygen can only reach some logs
easily. If you want to burn wood for a longer period,
make a compact stack.
09-20500-017
09-20500-018
D OVRE
15