Ego Power+ HTX5300-P Manual página 10

MAINTENANCE
EN
WARNING:
When servicing, only use identical
replacement parts. Use of any other parts may create a
hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified
service technician.
WARNING:
To avoid serious personal injury, always
remove the battery pack from the product when cleaning
or performing any maintenance.
CLEANING
◾
Use a soft brush to remove debris from all air intakes
and cutting blade.
◾
To remove pitch and other sticky residue, spray the
blades with resin solvent. Run the motor briefly so that
the solvent is evenly distributed, then wipe the surface
with a dry cloth.
WARNING:
Never use water for cleaning your
trimmer. Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from various
types of commercial solvents. Use clean cloth to remove
dirt, dust, oil, grease, etc.
SHARPENING THE BLADES
When cutting performance and behavior begin to
deteriorate, re-sharpen the blades. It is recommended
to have the blades re-sharpened by a qualified service
technician.
NOTICE:
Do not operate your hedge trimmer with dull or
damaged blades. This may cause overload and will give
unsatisfactory cutting results.
LUBRICATING THE BLADES (Fig. L)
For best operation and longer blade life, lubricate the
hedge trimmer blades with light-weight machine oil
before and after each use.
Remove the battery pack and lay the trimmer onto a flat
surface. Apply the oil along the edge of the top blade.
NOTICE:
For extended using period, it is advisable to take
a break, remove the battery and oil the blades.
WARNING:
Do not oil while the hedge trimmer is
running.
10
56 VOLT LITHIUM-ION ACCUHEGGENSCHAAR — HTX5300-P
TRANSMISSION GEARS LUBRICATION (Fig. M)
For best operation and longer lifetime, lubricate the
transmission gears in the cutting head and power head
assemblies with a special grease (5-6 ml in #1, #2 and #3
oil hole each time) after every 50 hours operation.
The grease should meet the following requirements:
- NLGI Grade Penetration: NLGI-2;
- Thickener Type: Polyurea;
- Recommended Operating Temperature Range: -40°C
to 180°C;
- Other than above, the grease should also be shear
stable with exceptional pressure characteristics and
excellent anti-wear property, and perfect oxidation
stability.
Remove the battery pack and the sealing bolts (Fig. M).
Lubricating the gear cases through the oil-hole.
NOTICE:
Don't fully fill the gear case with grease.
TRANSPORTING AND STORING
◾
Always place the blade sheath on the blade before
storing or transporting the hedge trimmer. Use caution
to avoid the sharp teeth of the blade.
◾
Clean the hedge trimmer thoroughly before storing.
◾
Store the hedge trimmer indoors, in a dry place that is
inaccessible to children.
◾
Keep away from corrosive agents such as garden
chemicals and deicing salts.
WARNING:
Blades are sharp. When handling the
blade assembly, wear non-slip, heavy-duty protective
gloves. Do not place your hand or fingers between
blades or in any position where they could get
pinched or cut. NEVER touch blades or service the unit
with battery pack installed.
PROTECTING THE ENVIRONMENT
Do not dispose of electrical appliances as
unsorted municipal waste, use separate
collection facilities.
Contact your local government for
information regarding the collection
systems available.
If electrical appliances are disposed of in
landfills or dumps, hazardous substances
can leak into the groundwater and get into
the food chain, damaging your health and
well-being.