Descargar Imprimir esta página

Ego Power+ HTX5300-P Manual página 11

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 28
TROUBLESHOOTING
PROBLEM
CAUSE
The battery pack is not attached to
the hedge trimmer.
No electrical contact between the
hedge trimmer and battery pack.
The battery pack charge is
depleted.
The battery pack is too hot. See
the chapter "Battery High-
temperature Protection".
Hedge trimmer
The hedge trimmer is too hot. See
doesn't work.
the chapter "Machine High-
temperature Protection".
The front and rear triggers are not
depressed simultaneously.
The blade is jammed.
The battery pack has electronics
error. See the chapter "Battery
Electronics Error Protection".
Dry or corroded blades.
Blade or blade support is bent.
Excessive
vibration or
Bent or damaged teeth.
noise.
Loose blade bolts.
WARRANTY
EGO WARRANTY POLICY
Please visit the website egopowerplus.com for full terms and conditions of the EGO Warranty policy.
SOLUTION
Attach the battery pack to the hedge trimmer.
Remove the battery pack, check contacts and
reinstall the battery pack
Charge the battery pack.
Remove the battery pack and cool the battery pack
until the temperature drops below 67°C.
Remove the battery pack and cool the hedge
trimmer until the temperature drops below 80°C.
Press and hold the front trigger first, move the lock-
off lever forward, and then press the rear trigger.
Remove the battery pack from the machine,
remove the obstruction carefully, then reinsert the
battery pack and restart the machine.
Replace the battery pack or contact EGO customer
service center.
Lubricate the blades, following the instructions in
the "LUBRICATING THE BLADES" section in this
manual.
Replace with a new blade or support. Contact EGO
service center for blade or support replacement.
Replace with a new blade. Contact EGO service
center for blade replacement.
Tighten the blade bolts. Use an adjustable wrench
and the included hex key to tighten the blade bolts
clockwise.
56 VOLT LITHIUM-ION ACCUHEGGENSCHAAR —— HTX5300-P
EN
11

Publicidad

loading