Suzuki 95400-2581 Instrucciones De Instalación página 3

Refer to a service manual, when removing or installing STD
parts.
 STD parts = Component parts of SUZUKI motorcycle
Installation
of
• Step 1. is only for the key cylin-
Key Cylinder
der attached with a motorcycle.
1. Remove the screws (a) and the
plate (b).
• Disuse the removed screws (a)
and plate (b).
Set the key cylinder in the cor-
rect position as the illustra-
tion.
• When the key is not turned
smoothly, do not install the
key cylinder into the Side
Cases 1 (L) and 2 (R) to pre-
vent from not removing of the
key from the key cylinder.
2. Insert the key cylinders into the
hole of the Side Cases 1 (L)
and 2 (R).
• Please check the key cylinder
is installed securely to the
Side Cases 1 (L) and 2 (R).
(a)
Correct
Hole
GENUINE SUZUKI ACCESSORIES
3/10
(b)
Incorrect