Publicidad
Idiomas disponibles
Idiomas disponibles
UK
MULTIMATCH 8 CONNECT
WARNING
•
Always respect applicable legislation for working with electrical equipment to reduce the risk of accidents.
•
Avoid looking directly into the beam of light, as this will result in dazzling.
•
Do not use the lamp near a naked flame.
•
Internal backup battery must be replaced with an original SCANGRIP battery.
•
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
•
Luminaire is only suitable for direct mounting on non-combustible surfaces.
•
The luminaire is designed to work with all 18V Metabo CAS battery packs.
•
If the lamp is disconnected from mains and the battery is discharged, push the power button to enable internal back up battery. 10%
LED will blink to indicate back up mode.
RESETTING THE BLUETOOTH PIN CODE
•
Turn on the Bluetooth function.
•
Press and hold the Bluetooth button (D) for 10 seconds.
•
When the Bluetooth indicator starts to blink, the pin code is reset.
INTEGRATED BLUETOOTH LIGHT CONTROL
•
Turn lamp on/off or adjust lamp output.
•
Control up to 4 lamps together.
•
Adjust colour temperature in steps from 2500 K to 6500 K
•
Assign pin code to prevent other users from controlling the lamp.
Compliant with iOS 10.3 or higher / Android 5.0 or higher.
Go to iTunes App Store, Google Play or download the app from our website.
USE
•
To turn the lamp on or off, press the A button.
•
Press and hold the A button to switch between brightness control and CCT Kelvin colour temperature manually.
•
To increase the brightness or colour temperature, press the B button.
•
To decrease the brightness or colour temperature, press the C button.
•
When the brightness level or colour temperature is changed, the new value is saved, and the lamp will start at that level the next time
it is turned on.
•
To enable/disable Bluetooth, press the D button.
•
CCT Scan mode is enabled by clicking the E button.
•
To pause at a specific colour temperature, click the E button while it is scanning.
•
Resume the scan by clicking the E button again.
•
To exit the CCT Scan mode, press and hold the E button for 2 seconds or turn the lamp off using the A button.
•
When exiting CCT Scan mode, the colour temperature will revert to the setting used before entering the CCT Scan mode.
•
When the CCT Scan mode is active, buttons B and C are deactivated.
CCT Scan Mode
•
By activating the CCT Scan mode, the lamp will automatically and fluently scan through all colour temperatures from 2500 K to 6500 K.
•
The user can pause the scan on any desired colour temperature.
•
The colour temperature will scan back and forth until the user stops or pauses the function.
Battery Compliance:
•
The work light is designed to be used with Metabo CAS batteries.
•
The lamp is also compatible with 3rd party 18 V batteries by using the SCANGRIP CONNECT system.
•
It will accept the following battery voltages: 18 V/20 V.
•
It is possible to use a Scangrip power supply instead of a battery.
•
When using a Scangrip power supply the optional battery cover must be removed.
The lamp has three different IP rating depending on the use:
•
IP65 when used with a Scangrip power supply.
•
IP54 When the optional battery cover is mounted and closed.
•
IP30 When the optional battery cover is removed and using an external battery.
USB Power Outlet
•
Built-in power bank with USB outlet to charge mobile devices.
•
Output: 5 V, 1 A.
•
The USB outlet is disabled when the lamp is in backup mode.
Discarded electrical products must not be disposed of together with household waste. Please use recycling facilities. Ask your local
authority or retailer for advice on recycling.
- The battery must be removed from the device before it is broken up
- The device must be disconnected from the mains when the battery is removed
- Please dispose of the battery safely
WARNING - RISK OF FIRE:
Minimum distance from lighted objects 0.1m
C
B
D
CCT
10% 25% 50% 75% 100%
SCAN
20% 40% 60% 80% 100%
25
35
45
55
65
E
0.1
m
A
3
Publicidad
