Beta 1972/K12V-10 Manual De Uso E Instrucciones página 11

Idiomas disponibles

OPERATION MANUAL AND INSTRUCTIONS

ISTRUZIONI PER L'USO

USE

Note: The drill driver can only be operated in combination with Beta's battery item 1994BL 12V-2AH.

Drill insertion

Rotate spindle (1) to open the jaws.

Insert the required accessory into the middle and tighten the jaws until the accessory is firmly fixed.

Setting direction of rotation

For screwing, clockwise rotation, press button (3) fully to the left in relation to the operator side.

For unscrewing, anti-clockwise rotation, move button (3) to the right relative to the operator side.

Set direction of rotation with tool not operating

Screwdriver mode

Rotate ring (2) to enable the torque to be selected in growing order (1 to 20):

1-7 for jobs on small screws

8-14 for jobs on soft materials

15-20 for jobs on soft or hard materials

Drill mode

Rotate ring (2) on

Speed selection

Shift button (9) to select the speed of rotation:

1 – low speed of rotation, for screwing/unscrewing operations or jobs with large diameter drills

2 – high speed of rotation, for jobs with small diameter drills.

Select the torque and speed with the tool not operating.

; the drill mode will be selected to enable drilling jobs to be carried out.

PARTS LEGEND

1. Spindle front.

2. Torque adjustment ring for impact wrench mode/drill

mode selection

3. Rotation selector button

4. Handle

5. Battery unlocking button

6. Battery

7. On/Off button

8. Built-in LED indicator

9. Speed selection button

10. Battery charge indicator

11. Belt clip