Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Cleaning and maintenance
WARNING!
• Before cleaning always turn off and unplug the unit
• When cleaning the unit, never use flammable or abrasive
products (such as benzene or white spirit), metal
brushes, scouring pads, wire wool or sharp utensils.
• Never immerse the unit, cable or power plug in water.
• Regularly clean your appliance and keep it dust free to optimise
its performance, reduce the need for repairs and ensure product
longevity.
• Clean the exterior with a soft, damp cloth. Make sure that no
liquid enters the unit.
Cleaning the air intake filters/cover
• Clean the upper/lower air intake filters/cover every 2 weeks in
dusty environments or after approximately 100 hours of use to
prevent the airflow from becoming restricted, and consequently,
damaging the unit.
1.
Hold the upper air intake filter's tab and remove it. Slide the lower air intake filter
out of its slot.
2.
Wipe the lower air intake cover with a soft, damp cloth to remove any dust.
3.
Rinse the parts under running water on the opposite side to the air flow's direction.
Use a mild detergent to remove any stubborn dirt.
4.
Allow to dry naturally and thoroughly.
5.
Reinstall the parts.
Manually draining the unit
• Condensation may collect in the unit, especially in humid
environments or areas in which the day and night temperatures
vary considerably.
• When the drain pan is full, the unit will automatically turn off
and Ft will appear on the display.
• Carefully position the unit over a drain or place a container under
the drain plug to collect the water. Remove the drain plug and
33
EN
Publicidad
