Publicidad
11.Never use the product close to combustibles.
12.Do not let cord hang over edge of counter or touch hot surfaces.
13.Never leave the product connected to the power source without supervision.
Even when use is interrupted for a short time, turn it off from the network, unplug
the power.
14.In order to provide additional protection, it is recommended to install residue
current device (RCD) in the power circuit, with residual current rating not more
than 30 mA. Contact professional electrician in this matter.
15. Avoid getting the radio wet.
16. The radio may only be wiped with a dry cloth. Do not use water or cleaning
fluids.
17. Special discs for cleaning the CD player should be used regularly.
18. The radio should be kept in a dry room.
Device Description (Dab Radio):
A. Screen B. Up Button C. OK. button D. Down button E. Power / Mode button
F. Volume Up button G. Volume Down button H. Charging port
I. Headphones port J. Antenna.
Getting started:
1. Fully charge the device using the Charging port (H)
2. Fully extend the antenna (j)
Device use:
To power on the device press and hole the Power / Mode button (E).
TO change modes in the device. While the device is powered on press and release the Power / Mode (E) button to switch
between inputs / modes.
To put the device into stanby mode (The device then displays clock and date only) Press and hold the Power / Mode
button (E).
To turn off the device. Press and hold the Power / Mode button during standby mode.
To return the device from standby mode to playback mode press the Power / Mode button shortly.
Fm radio use:
1. Turn on the device.
2. Select the FM option by pressing the Power / Mode button. Press the OK. button (C) to confirm selction.
3. To change the frequency you can use the Up or Down buttons (B,D) or pressing the OK. button.
4. The radio will play the first found radio frequency.
5. to Save the frequency / Radio station: Press the Volume down button (G). You will enter the device settings. Select the
second option of Save Selection / Preset Store by pressing the UP and Down (B,D) buttons and then pressing the
OK. button (C). Then using the Up and Down buttons (B,D) select the desired possition.
6. To use the previously stored presets / Favorites. Press the Volume Down (F) button. Select the Preset Recall option.
Select the desired preset and press the OK. button (C) button to choose and play back the frequency.
7. To change frequency manually you can press the UP and Down (B,D) buttons, this will change the current frequency by
0.05MHz.
Increasing and decreasing the volume of the device:
To increase or decrease the volume of the music press and hole the Volume Up or Volume Down buttons (F,G).
Bluetooth mode:
1. Enter the Blue tooth mode by pressing the Power / Mode button.
2. Select the Bluetooth mode.
3. Search on your transiving device for the model AD 1198.
4. Connect with the device.
System settings:
TO change Lanugage, Storred stations and other settings:
1. Press the Volume Down button (G) once. You will enter the settings.
2. Using the Up and Down buttons (B, D) move to your selection.
4
Publicidad
