Black and Decker BDRV1 Manual De Instrucciones página 11

SETTING UP THE ROBOSERIES
STEP 1
Install the side brush by pushing firmly down until it clicks into place.
NOTE: Allow your Vacuum to fully charge (up to 5 hours) before first use.
The indicators on your robot will turn solid white when fully charged.
STEP 2
Position the Vacuum on the floor near your charge dock as shown. To turn on Press and Hold
the Power button until the indicator turns white.
STEP 3
Now press the button . The Power and Home icons will slowly fade on/off while charging
and turn solid white when fully charged.
9