Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
STEP 3 Adjust the leveling feet
CAUTION
Make sure all the leveling feet are seating on the floor surface to avoid the Laundry Hub from moving or
generating noise due to vibration. Then, check if the Laundry Hub is rocking. If the Laundry Hub is not
rocking, tighten the nuts.
34
English
Untitled-1 34
1. Gently slide the washer into position. Excessive force
may damage the levelling feet.
2. Level the washer by manually adjusting the levelling
feet.
3. When levelling is complete, tighten the nuts using
the spanner.
NOTE
Use the open-end of the supplied wrench to adjust the
leveling feet.
CAUTION
When installing the product make sure the leveling feet
is not pressing the power cord.
2023-11-09( )
11:53:36
Publicidad
