Origin 21 149070 Manual De Instrucciones página 10

ASSEMBLY INSTRUCTIONS
3. Attaching the media bay partition
• Locate the Upper Partition (C).
• Using a Phillips screwdriver as shown, insert the
pre-installed screws on the Upper Partition (C)
into the pre-drilled holes on the Fixed Shelf (B).
Hardware Used
Ø4x50mm
CC
Screw
4. Assembling the fireplace surround
• Locate the Left and Right Inside Panels (D
and E).
• Align and insert the pre-installed screws and
dowels on the edges of the Left and Right
Inside Panels (D and E) with the holes on the
Fixed Shelf (B) as shown.
• Tighten the fasteners on the Left and Right
Inside Panels (D and E) using a Phillips
Screwdriver.
5. Attaching the wire clips
• Insert Wire Clips (LL) into pre-drilled holes
in the rail of the Right Partition (E), pushing
them in by hand.
Hardware Used
Wire Clip
LL
23MMP35115REV1.0
x 2
x 3
10
3
C
B
4
5
E
D