Publicidad
(English)
Notes:
1.Do not look directly at or illuminate by means of an instrument (telescope)!
2.Do not remove the baffle on the lens guard and avoid exposure to the eyes!
3.Please work with professional staff when it needed disassembled, adjusted or repaired!
4.Do not disassemble, impact, squeeze, or put into fire or water. If there is a serious bulging, please
do not continue to use. Do not put it in high temperature!
Reading Skills
In order to obtain good reading effect, the target beam projected by
the viewfinder should aim at the center of the barcode, but
can be aimed in any direction for reading.
Aim at the barcode and press the trigger to make the target beam in the middle of the barcode.
The closer to the barcode, The beam becomes smaller farther away from the barcode, The beam
becomes larger. If the bar code is small, the scanner should be close to the barcode. If the
barcode is larger, the scanner should be further away from the barcode, making it easier to read
the barcode correctly.
If the barcode is high in reflectance (for example, coated), you may need to tilt the scanner at an
Angle to successfully scan the barcode.
Simple-maintain
1. The stains and dust on the scan window will be affect the scanner's working. When cleaning,
you should use good quality facial tissue to wipe gently. Then blow it clean with a blown
balloon. If you use poor paper to clean for a long time, it will damage the surface of the
scanning window and affect the reading effect of the scanner.
The casing of the scanner can be wiped with a clean soft cloth. If needed, use a little
detergent to add water and rub it with a soft cloth.
Publicidad
