Descargar Imprimir esta página

auronic AU3261 Manual De Instrucciones página 23

Altavoz bluetooth partybox

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 56
Do not throw batteries/batteries into a fire. Do not attempt to crush, puncture or otherwise
disassemble batteries/batteries for any reason.
Keep the battery/battery pack away from open flames. Do not short-circuit the battery/
battery pack.
Fully charge the product before using it for the first time. This may take a few hours.
3. INSTRUCTIONS FOR USE
3.1 Charging
1.
Before first use, fully charge the built-in battery.
2. Connect the USB-C cable between the charging port on the product and a USB port on a
computer or a USB power adapter.
Battery status
Battery low (<20%)
30% charged
30-70% charged
70-99% charged
3 solid white lights
Note
If the battery charge is <5%, the product will automatically turn off.
3.2 Turning on
Press
until you hear a rising tone and the bluetooth LED indicator lights up.
3.3 Turning off
Press
until you hear a descending tone and the bluetooth LED indicator turns off.
3.4 Making Bluetooth connection
Make sure the product is within 10 meters of your mobile device.
1.
Press
until you hear a rising tone and the bluetooth LED indicator flashes blue rapidly.
2. Go to the bluetooth settings on your mobile device, search and select "Auronic Partybox"
from the list.
3. Once the connection is established, the LED indicator will turn blue.
Note
When turning on, the product automatically reconnects to the last mobile device it was
connected to. The product can remember up to 8 paired devices.
The product automatically turns off after 10 minutes in pairing mode when no devices are
paired to save power.
LED indicator for battery
Blinks red (3 beeps at 20%, 10% and off)
First white light blinks
Second white light blinks
Third white light is flashing
Fully charged
English
23

Publicidad

loading

Productos relacionados para auronic AU3261