Publicidad
Idiomas disponibles
Idiomas disponibles
3.9 LED light mode
Press
to change the modes of the LED lights.
1
Musical pulse
2
Rotation semicircle
3
Full-cycle rotation
4
Flash rhythm
5
Musical pulse
6
Lights off
3.10 Sound mode
Press M twice in a row to change the sound mode. The LED indicator slowly blinks blue in
outdoor mode and the LED indicator remains blue in indoor mode.
Note
◊
The default mode of this product is indoor.
◊
In USB disk and TF card mode, the LED is green.
3.11 TF card reader (micro-SD card).
Insert your TF card into the port, the product will automatically switch to TF card reader mode
and play the music on the card.
3.12 Reset
If the function buttons do not work, disconnect the charging cable, insert a pin (<3mm) into the
reset button and hold it for 2 seconds until the LED turns off.
4. TROUBLESHOOTING
Problem
Product does not turn on.
Cannot connect to the
device.
Pulse from bottom to top
Rotate to the rhythm of the music
Rotation speed automatically adjusts to the beat of the music
Brightness flashes with the beats of the music
From the middle to the top and bottom pulse
Cause
The battery is not sufficiently
charged.
The Bluetooth device does
not support the A2DP profile.
The product is not within 10
meters of the device.
The product is not in pairing
mode.
Solution
Charge the speaker and
make sure it is sufficiently
charged.
Make sure your Bluetooth
device supports the A2DP
profile.
Make sure the product is
within 10 meters of the device.
Make sure the product is in
pairing mode and the LED
indicator is blinking blue.
English
25
Publicidad
