Sony SPP-AQ600 Manual De Instrucciones página 40

Transferring a message (continued)
Notifying you of new message (message transfer)
The unit starts transferring the incoming message 10 seconds after the
message is recorded. To pick up the new message, you need to set
your security code (see page 35).
1
2
3
If you answer this call, you hear a transfer message for one minute, if
recorded.
When you hear the message, press CD and your security code.
Press the control codes (GDI, CD2 or CD3) to pick up the new message (see
page 36).
Notes
• If a transfer message is not recorded, the unit does not play back a transfer
message.
• If you answer the call while the incoming message is recorded, the message is not
notified.
• If the unit cannot connect the registered phone number, it tries two more times with
15 minutes intervals. However, the unit stops trying when:
- you operate the base phone during the interval time.
- you press (TALK). ( FLASH/REMOTE ) or ( INTERCOM) of the handset
during the interval time.
• If you want to cancel transferring during the message is transferred, press
( SPEAKERPHONE ).
• Don't elapse two seconds between each digit of your security code and control
code.
Tip
The memo messages and conversation recordings are not transferred.
40™ Using as a telephone answering machine