Cameo AZOR W2 Manual De Usuario página 14

A delay can be set for slave units for the time-delayed output of the control signal of the
stand-alone operating modes. Activate one of the eight available scenes (Scene 1 - 8) or one of
the eight available loops (Loop 1 - 8). The settings are made individually for each scene and each
loop and are retained even after the device is restarted.
Starting from the main screen, press MENU to enter the main menu. Use the ⏶ or ⏷ buttons to
select the Stand Alone menu item and confirm with ENTER. Now select the desired submenu
item, confirm and then make the settings as required (see table).
14
Forward control signal via DMX OUT and set delay
for slave units: Off, 0.1s - 2.0s
Do not forward control signal
Select and activate the desired scene
Select and activate the desired loop
Set each scene individually.
Scenes are activated by selecting them.
Select scene 1 - 8
Set step time
Set fade time
"
Select scene 1 - 8 / skip step
Set step time
Set fade time
"
"
"
"
"