Publicidad
Idiomas disponibles
Idiomas disponibles
QUICKLIGHT
Set up a scene quickly and easily using the basic Moving Head functions without an external
controller. Starting from the main screen, press MENU to access the main menu. Use ⏶ or ⏷ to
select Quicklight and confirm with ENTER. Now select the desired submenu item, confirm, set
the value as required and confirm again.
If the Quicklight mode is activated, the display does not automatically return to the main screen.
Quicklight mode is automatically cancelled when you exit the Quicklight menu. The Quicklight
settings are retained until the next restart of the spotlight. Quicklight can be accessed repeatedly
with the same settings as long as the spotlight remains switched on. After a restart, the values are
reset to the factory settings.
SETUP AND INSTALLATION
DANGER: Overhead mounting requires extensive experience, including calculating the
load limit values of the mounting hardware and regular safety inspection of all instal-
lation materials and spotlights. If you do not have these qualifications, do not attempt
to perform an installation yourself. Refer instead to a qualified professional. There is
a risk that devices that are incorrectly mounted and secured may come loose and fall
down. This can cause serious injury or death.
Thanks to its integrated rubber feet, the spotlight can be positioned in a suitable location on a
level surface. It can be truss-mounted using two Omega brackets, which are attached to the base
of the device (A). Two Omega brackets are included. Suitable truss clamps are available as an
option. Ensure firm connections and secure the spotlight to the securing lug (B) with a suitable
safety cable.
20
B
A
- Illustrations similar -
A
Publicidad
