Publicidad
12
OPERATING INSTRUCTIONS
Eco (ENERGY SAVER) MODE:
DO THIS:
PRESS MODE
BUTTON
CHOOSE Eco
YOU WILL SEE:
The unit is factory set to run in Eco (energy
saver) mode. We recommend leaving the
unit in Eco mode to help save energy and
money. However, to switch out of Eco mode,
press the mode button until another mode is
selected.
In Eco mode, the fan will continue to run for 3
minutes after the compressor shuts o . The
fan then cycles on for 120 seconds at 10
minutes intervals until the room temperature
is above the set temperature, at which time
the compressor turns back on.
NOTE:
Please note, that if the unit is changed to
'Cool', 'Dry' or 'Fan Only' mode then shut o ,
the unit will turn back on in Eco mode. This is
mandatory per government regulations. If
the unit is changed to 'Cool', 'Dry' or 'Fan
Only' mode and a power failure occurs, once
the power is restored, the unit will return to
'Cool' or 'Fan Only' mode.
TO ACTIVATE THE CHILD LOCK FEATURE:
DO THIS:
PRESS AND HOLD THE
MODE BUTTON FOR 3 SECONDS
YOU WILL SEE:
Pressing and holding the Mode button for 3
seconds will activate or deactivate the Lock
function. The display will show LC for 5 secs.
The control panel will be locked and settings
cannot be changed.
CHECK DUST FILTER FEATURE:
This feature is a reminder to clean the Dust Filter
(See Care and Cleaning). The Dust Filter light will
illuminate after 250 hours of operation. To reset
after cleaning the filter, hold the "Fan" button for
5 seconds.
YOU WILL SEE:
DO THIS:
HOLD FAN BUTTON
5 SECONDS
Publicidad
