AENO HD1 Guia De Inicio Rapido página 11

to maintain stable operation of the device. Clean the filter by following the
steps below:
1. Lower the air inlet by pulling it downwards (see fig. C).
2. Remove dust and hair from the filter using a dry cloth and/or a brush (see fig. E).
WARNING! Do not wash the filter under running water.
3. Reinstall the air inlet (see fig. D).
Self-Cleaning Function
For a detailed description of the self-cleaning function, see the complete
operation manual available at aeno.com/documents.
Troubleshooting
1. The device does not turn on. Possible causes: the outlet is defective; overheat
protection was activated. Solution: check if the outlet is working correctly by
plugging another device into it, if necessary reconnect the device to a
working outlet; unplug the device and let it cool down completely.
2. The airflow is weak. Possible causes: foreign objects present in the nozzle or
in the attachment; low operating speed is selected. Solution: unplug the
device, allow it to cool down completely, then remove and clean the nozzle
or the attachment; adjust the speed using the speed control button.
WARNING! If none of the suggested methods solved the problem, contact the
supplier or an authorized service centre. Do not disassemble or attempt to
repair the device yourself.
ASBISc reserves the right to modify the device and to make changes and additions to
this document without prior notice to users.
The warranty period and service life is 2 years from the date of retail sale of the product.
Manufacturer information: ASBISc Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101,
Limassol, Cyprus. Made in China. All trademarks and names herein are the property of
their respective owners. Up-to-date information and a detailed description of the device,
as well as connection instructions, certificates, information about companies that accept
quality claims and warranties, are available for download at aeno.com/documents.
aeno.com/documents 11