Publicidad
Idiomas disponibles
Idiomas disponibles
3. Safety
After exceeding the specification limits or in case of visible changes to the instrument, this
must be stopped immediately and checked by an authorised WIKA service engineer. The
manufacturer shall not be liable for claims of any type based on operation contrary to the
intended use.
EN
Should the operating instructions not be observed or complied with, approvals (e.g.
EHEDG) can become invalid.
3.2 Improper use
WARNING!
Injuries through improper use
Improper use of the instrument can lead to hazardous situations and injuries.
▶
Refrain from unauthorised modifications/repairs to the instrument.
▶
Do not use the instrument as part of a safety device for protection against
exceeding permissible limits (safety accessory).
▶
The instrument must not be used as a climbing aid.
Any use beyond or different to the intended use (see chapter 3.1) is considered as
improper use.
3.3 Responsibility of the operator
The instrument is used in the industrial sector. The operator is therefore responsible for
legal obligations regarding safety at work.
The safety instructions within these operating instructions, as well as the safety, accident
prevention and environmental protection regulations for the application area must be
maintained.
The operator is obliged to maintain the product label in a legible condition.
To ensure safe working on the instrument, the operating company must ensure
that the instrument is suitable for the particular application in accordance with its
■
intended use.
that the instrument is only used in applications that lie within its technical performance
■
limits (e.g. max. ambient temperature, material compatibility, ...).
that the compatibility between the wetted parts, the medium and the environment is
■
ensured.
that the requisite personal protective equipment is provided.
■
10
WIKA operating instructions, model DSSA11SA
Publicidad
