Section 4: Operation
How to Use Accessory
Tray
The unit is equipped with an accessory tray with places to
store your rotating brush_ utility brush_ turbo nozzle_ and
ProjectPro TMnozzles.There
is also a hook at the front of
the accessory tray to hold your hgh pressure hose.
I.
Store your gun and nozzle extension on the hooks
attached to the base and handle, as shown in Figure 13.
2.
Place rotating brush through hole on accessory tray on
fight side of unit (Figure 13).
3.
Place utiky brush through hole on accessory tray, as
shown in Figure 13.
3.
Push turbo nozzle up and into dip on accessory tray
until it snaps in, as shown in Figure 13.
4.
Hang high pressure hose on hook attached to accessory
tray on front of tray, as shown in Figure 13.
How to Use ProjectPro
TM
Nozzle
The quick-connect
on the nozzle extension
allows you to
switch between four different ProjectPro TMsystem nozzles.
The ProjectPro TM nozzles vary the pressure and spray
pattern as shown (Figure 14).
cAuTlo.
]
Low
Pressure
Bhck
Use to apply
/
detergent
High
Pressure
Delicate
40 ° Yellow
[ 750 PSi
2.3 GPH
\
General
Max
5° Orange
0 ° Red
2200 PSI
2550 PSI
2.2 GPH
2.0 GPM
Follow
these
instructions
to change
ProjectPro
-rM
nozzles:
I.
Engage trigger lock on spray gun.
2.
Pull back collar on quick-connect
and pull current
ProjectPro TMnozzle off. Store ProjectPro TMnozzles in
holder provided on the accessory tray.
3.
Select desired ProjectPro TM nozzle:
For delicate rinse (lower pressure and higher
flow), for gentle cleaning of cars/trucks, boats, RV's,
patio furniture,
lawn equipment, etc., select yellow
Delicate ProjectPro TMnozzle (Figure 15).
TM
NEVER exchange ProjectPro
nozzles withou_ locking the
trigger lock on the trigger,
DO NOT twist ProiectPro TMnozzles while spraying.