Setting For Sos Function; Keyboard Tone - Smanos WK8000 Manual De Funcionamiento

EN

Setting for SOS Function

Direct SOS
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for
10 seconds, the setup is successful. After the setting, pressing the
SOS button for 3 seconds will trigger the alarm immediately.
Input Code for SOS
Enter setup state, input:
After the setting, input the user code or the admin code, then
long press SOS button for 3 seconds, the keypad will send a
SOS signal to the control panel and the control panel will alarm
immediately.
Note: Default setting: 0, direct SOS.
11

Keyboard Tone

Turn off Keyboard Tone
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for
10 seconds, the setup is successful.
Turn on Keyboard Tone
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for
10 seconds, the setup is successful.
Note: Default setting: 1, turn on keyboard tone.
EN
12