Hitachi YUTAKI S COMBI Serie Manual De Instrucciones página 37

UNIT INSTALLATION
6.1.2 Unpacking
All units are supplied with a wooden base, packed by a
cardboard box and plastic bag.
Firstly to unpack it, place the unit on the assembly area as close
as possible to its final installation location, to avoid damages in
transport. Two persons are required.
1 Cut the strapping bands and remove the adhesive tapes.
2 Remove the carton cap and then the plastic bag around the
unit. Afterwards, remove the rest of carton parts.
19 PMML0573 rev.1 - 07/2021
Strapping bands
Carton cap
Carton parts
3 Unscrew the 4 screws which fix the unit to the wooden base.
!
C A U T I O N
Be careful with the Installation and Operation manual and with the factory-
supplied accessories box located at the top of the unit.
4 Remove the indoor unit from the wooden base and place it
carefully on the floor, as near as possible to its final location.
Wooden
base
Screws