Craftsman 137.212890 Manual De Instrucciones página 2

SECTION PAGE SECTION PAGE
Warranty ........................................ 2
Product Specifications ...................... 2
Power Tool Safety ............................ 3
Chop Saw Safety ................................. 4
Electrical Requirements and Safety ...... 7
Carton Contents .................................. 8
Know Your Chop Saw ............................... 9
Assembly and Adjustments ..................... 10
Operation ........................................... 13
Maintenance ...................................... 14
Troubleshooting Guide ........................... 15
Parts List .............................................. 16
CRAFTSMAN FULL WARRANTY
If this Craftsman product fails due to a manufacturer's defect in material or workmanship with one year from the date
of purchase, return it to any Sears store, Sears Parts & Repair Service Center, or other Craftsman outlet in the United
States for free free repair ( or replacement if repair proves impossible). This warranty does not include expendable
parts such as saw blades which can wear out from normal use within the warranty period. This warranty applies for
only 90 days from the date of purchase if this product is ever used for commercial or rental purposes. This warranty
gives you special legal rights,and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
],A, WARNING I
Some dust created by using power tools contains chemicals known to the state of California to cause cancer
and birth defects or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks, cement and other masonry products
• Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well ventilated area and work with approved safety equipment such as
dust masks that are specially designed to filter out microscopic particles.
MOTOR
HP (Maximum developed) .......................... 3.5
Type ........................................................... Universal
Amps .......................................................... 15
Blade arbor size .......................................... 1 in.
Voltage ....................................................... 120
Hz ............................................................... 60
RPM (no load) ............................................ 3300
Wheel size .................................................. 14 in.
Extension wing ...................................... Yes
Laser guide ........................................... Yes
Maximum cutting height ........................ 5 in. @ 2 in. wide
Maximum cutting width .......................... 7 in. @ 3 in. tall
Vise clamp angle ................................... 0° - 45 °
I_, WARNING I
To avoid electrical hazards, fire hazards or damage to the chop saw, use proper circuit protection.
This chop saw is wired at the factory for 110-120 Volt operation. It must be connected to a 110-120 Volt /
15 Ampere time delay fuse or circuit breaker. To avoid shock or fire, replace power cord immediately if it is
worn, cut or damaged in any way.
Before using your chop saw, it is critical that you read and understand these safety rules. Failure to follow
these rules could result in serious injury to you or damage to the chop saw.
2011/07