JANE CONCORD iGRADE Manual De Instrucciones página 33

• Place the child in the seat making sure that they are sitting with their back straight
against the backrest of the seat. Bring the upper ends of the buckle together. Insert them
into the lock and press until you hear them click into place. (3c)
• Pull the tightener strap (7b). Correct belt tension is very important for the child's safety,
do not leave the belts slack. (3d)
_ Adjusting the height of the integral straps
The height of the shoulder strap should be adjusted as the child grows.
Check the correct position of the shoulder straps with the child correctly positioned in the
seat. The straps should be slightly above the child's shoulders. (4e)
To change the height of the straps, follow the steps below:
• Pull the ring on the top part of the headrest (1a), this will unlock the headrest position.
Move the headrest (1) to the right position for the child and release the lever. Move the
headrest until you hear the locking click. Pull the headrest to make sure that it is locked
in place. (4b)
NOTE: Adjust this height as the child grows
EN
31