JANE CONCORD iGRADE Manual De Instrucciones página 36

• In some vehicles, the ISOFIX anchors are difficult to access or they are hidden between
the foam sections of the vehicle seat. With the seat we have provided some guides (15)
making it easier to locate them, insert them before the following step.
• Guide the anchors towards the axles in your vehicle and press until both sides are locked into
place, two green signals on both buttons (5b) or two green lights on the control panel will show
that they are securely anchored. If one or both of the signals are red, try again. (6b)
• Press the base (3) against the backrest of the vehicle until it is firmly in place.
_ Adjusting the height of the headrest
The height of the headrest is adjusted using the handle found on the top of the headrest.
To release the lock pull the ring upwards, when you release it, the headrest will lock into the
nearest position.
• Pass the lower lap part or the shoulder part of the vehicle seat belt through the belt
guide on the side of the headrest (13).
• Position the child in the booster seat, and adjust the height of the headrest using the
handle (1a). The seat belt should be slightly above the child's shoulder. (7a)
IMPORTANT: Adjust this height as the child grows
EN
34