Model: 2145eU
Hang the grease cup in the slot at the back of the
STEP 06
griddle body�
With the help of another person, place the griddle top on the main
body by aligning the 4 pins to the holes of the body�
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Make sure the front pins are
seated in the holes, then push
NEVER leave oil exposed in the rain. This can lead to severe
the griddle top back�
burns. Cover the burner when not in use or if it begins to rain.
Grease build-up on the Flame Tamper can catch fire when
❶ ❶ Place the two front pins into
heated.
the front locking holes and push
To prevent damage to the unit and/or injury, clean the top of
the griddle top back�
the Flame Tamper after each use.
❷ ❷ Then, set the two rear pins
into the rear holes�
NOTICE
DO NOT sit or stand on the table.
SUPPORT BLACKSTONE EUROPE.COM
BLACKSTONEPRODUCTS.COM/SUPPORT
CAUTIoN
CAUTIoN
ASSEMBLY GUIDE
Proceed to USING YOUR BLACKSTONE�
STEP 07
NOTICE
• Maximum weight on the side shelf is 10 lbs (4.5 kg).
• The side shelf may get hot while appliance is in use.
NOTICE
• Maximum weight on the tabletop is 100 lbs (45 kg).
• Maximum weight on the inner shelf is 50 lbs (22.5 kg).
• Maximum weight on the side shelf is 10 lbs (4.5 kg).
| OWNER'S MANUAL
07