Descargar Imprimir esta página

cecotec POWER BLACK TITANIUM 2200MAX SMOOTH Manual De Instrucciones página 31

Batidora de vaso

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
3. OPERATION
1.
Place the food you want to grind in the jug. It is recommended to cut the food into 1.5 cm x
1.5 cm x 1.5 cm cubes before placing them in the jug.
Warning:
-
The ideal ratio of solid to liquid food is 2 parts solid to 3 parts liquid. If the consistency
of the food to be ground is too dense, it may cause damage to the product and affect its
durability.
-
Make sure that the amount of food does not exceed the maximum level (1.75 L) indicated
on the jug. Do not start the blender if the jug is empty.
2. Insert the measuring cup and turn it clockwise until you hear a click, indicating that the two
parts are securely locked together. This step ensures safe and efficient operation of the
blender. (See Fig. 2).
3. Place the lid on the jug (See Figure 3).
4. Place the jug on the blender base as indicated by the arrows shown in Figure 4.
5. Plug the blender into the mains. If the installation is successful, the LED indicator lights on
the buttons will turn on and the blender will enter standby mode.
Warning: make sure that the jug is correctly fitted in the blender base before use. If it is not in
its proper position, the blender will not work.
6. Once the selected function is finished, the blender will stop automatically. Unplug, remove
the jug, open the lid, and pour in the chopped food.
7.
Instead of activating any of the three functions, you can turn the speed knob to operate
the appliance.
8. Turn the knob to the MIN position when the mixture has reached the desired consistency.
9. Press the power button and unplug the machine; remove the jug, open the lid, and pour in
the mixture.
WARNING:
-
Do not start the blender if the jug is empty.
-
The maximum duration of each cycle is 3 minutes, and the blender must remain off for 1
minute to allow it to cool down before the next cycle. The blender should not be used for
more than 10 consecutive cycles at a time to prolong its life.
Speed knob/Turbo function
Briefly press this knob to switch on the blender. The blue indicator lights of the 3 programmes
and the speed knob ring will illuminate, indicating that it is ready for use. Turn the knob to
adjust the speed from MIN to MAX. The indicators will light up according to the selected speed.
POWER BLACK TITANIUM 2200MAX SMOOTH
ENGLISH
31

Publicidad

loading

Este manual también es adecuado para:

04393