Publicidad
Idiomas disponibles
Idiomas disponibles
2.
TECMA SANITARY SYSTEM
Tecma marine sanitary systems are made in Italy. The entire production is made in the district of Civita
Castellana, which is well known for manufacturing top-quality ceramic sanitary ware.
The Tecma Research and Development department has, over the years, developed a series of solutions
featuring different shapes and sizes. This wide range of solutions allows you to install a Tecma toilet
wherever there are space, style and weight constraints.
Tecma toilets can be requested with integrated or separate bidet with the same geometry. The Tecma
system is based on the combined action of a macerator pump to discharge blackwater, and an inlet
pump or solenoid valve for the clean water inlet.
All the ceramic toilets have a built-in macerator pump, which pushes blackwater to the blackwater tanks.
Shredding occurs in a specific cavity equipped with steel blades positioned before the pump impeller.
The flushing cycle is activated from different models of control panels. There are specific options
available according to the control panel model, such as blackwater tank monitoring, adjustment of the
water used during the flushing cycle, etc.
This product is characterised by its pump power, and for its reliable and simple mechanism. A global
service network is always available to provide assistance and spare parts.
2.1
Marine Toilet Installation
WARNING: Read and understand the warnings listed in this document before you install,
operate, or service this system. If you do not obey these warnings, there is a risk of property
loss, injury, or electrocution. Do not make any changes to this unit as this could result in
property damage, injury, or electrocution.
Tecma has no responsibility or liability for damages to equipment, injury, or death that may
result from the system's improper installation, service, or operation.
Tecma recommends that plumbing and electrical work be performed by a licensed
tradesperson. Local permit and code compliance is required.
WARNING: Danger of Electric Shock, Fire and Flooding. Failure to heed these warnings can result
in loss of property, injury and death.
WARNING:
Do not leave children unattended to use the toilet. Do not put body parts inside the
toilet.
HAZARD WARNING: Contact with moving part
ALWAYS disconnect power to the toilet before servicing. There is a serious injury risk by
placing hands/fingers in the bowl discharge because of the high-speed macerating impeller
located directly below the bowl discharge. NEVER attempt to dis-lodge an obstruction in the
pump by placing your hands/fingers in harm's way while it is running.
Tecma S.r.l.
Via Flaminia | Loc. Castello delle Formiche
05030 Otricoli (TR)
ITALY
Compass ECO | installation manual NA | ENG
5
T +39 0744 709071
info@tecma.eu
www.thetfordmarine.com
Publicidad
