HAMPTON BAY SCENIC Guía De Uso Y Mantenimiento página 8

Assembly - Hanging the Fan (continued)
3
Hanging the fan-motor assembly
□
Carefully lift the fan motor assembly (C) and engage the
slot in the motor bracket on the top of the fan motor
assembly (C) with the hook on the mounting plate (A) so
that it is securely suspended. Then connect the wiring
to your fan according to step 4 "Making the Electrical
Connections".
□
Once the wiring is complete, lift the motor bracket on the
top of the fan motor assembly (B) up to the mounting plate,
remove the screw (JJ) from the mounting plate (A) on the
side of round hole and loosen but do not remove the other
three screws.
□
Push the fan motor assembly to the left so that the three
loosened screw heads fit into the slots.
□
Reinstall the screw (JJ) removed in the first step and
tighten all the screws.
JJ
4
A
B
A
B
8
Making the electrical connection
WARNING: Each wire nut supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
IMPORTANT: Use the plastic wire connectors (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
□
Connect the fan motor green wires to the household green or
bare wire using a wire connecting nut (BB).
□
Connect the fan motor white wire to the household white wire
using a wire connecting nut (BB).
□
Connect the fan motor black and blue wires to the household
black wire using a wire connecting nut (BB).
□
Secure each wire connecting nut using electrical tape.
□
Turn the wire connecting nut (BB) upward and push the wiring
into the outlet box (FF).
White Black & Blue
Outlet box
(FF)
Green or bare wire
Green
A
B