STAMOS TRON 200 RV Manual De Instrucciones página 116

Electrode DC
E6010 EP
E6011 EP
E6013 EP, EN
E7014 EP, EN
E7018 EP
E7024 EP, EN
E308L EP
EP = Electrode positive (reverse polarity)
EN = Electrode negative (strait polarity)
*AWS (American Welding Society) Standards
** GB/T 5117 China Standards
10.3. Striking an Arc
Weld current starts when electrode touches workpiece.
1. Electrode
2. Workpiece
3. Arc
Scratch Technique: Drag electrode across workpiece like striking a match; lift electrode slightly
after touching work. If arc goes out, electrode was lifted too high. If electrode sticks to
workpiece, use a quick twist to free it.
EN
AC Position
All
All
�
All
�
All
�
All
�
Flat
�
All
�
Penetration
Deep
Deep
Low
Medium
Medium
Low
Low