Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning
To remove mineral deposits that may have built up inside the water pump, mix 1.5 gallons of
water with 50 g of citric acid crystals (not included) or cleaning solution of your choice. This
is recommended to be done at a time when the water bottle is already empty.
1. Open the cabinet and remove the 5 gallon water bottle.
2. Pour this cleaning solution into the 5 gallon water jug.
3. Turn the valve located along the back
of the cabinet above the filters to the off
position (perpendicular to the tubing).
5. Remove the push connect plug of the
Pump Cleaning Drain (#20) by pressing in
on the grey ring and pulling on the plug
simultaneously.
4. Place a large cup or bucket below the
Pump Cleaning Drain (#20) located at the
lower back of the unit.
6. Place the probe back into the 5 gallon
water jug and slide it back into the cabinet
and close the door.
English
Cleaning
28
Publicidad
