Avalon A3F Manual De Uso Y Mantenimiento página 34

English
Cleaning
Cleaning
7. Press the Cool Water Push Button (#7) for 3 seconds to activate the pump. The pump will
begin pumping the cleaning solution from the 5 gallon water bottle back out through the Pump
Cleaning Drain (#20) located at the lower back of the unit into your large cup or bucket.
8. Once the cleaning solution stops flowing out of the Pump Cleaning Drain (#20), remove the
empty 5 gallon water bottle and refill another gallon of tap water into it. Place it back inside the
cabinet and close the door.
9. Press the Cool Water Push Button (#7) for 3 seconds to activate the pump again. The water will
flush through the pump and out through the Pump Cleaning Drain (#20) located at the lower back
of the unit into your large cup or bucket.
10. Once the water stops flowing out of the
Pump Cleaning Drain (#20), you can replace
the plug into the Pump Cleaning Drain (#20).
12. Refer to the instructions on Refilling the Bottle and use as normal.
29
11. Turn the valve located along the back
of the cabinet above the filters back to the
on position (parallel to the tubing).