Home Decorators Collection BRIMFIELD HB7102-151 Guía De Uso Y Mantenimiento página 7

Installation (continued)
5
Threading the cord

Feed the cord and fixture ground wire into
the center hole of the screw collar loop (FF),
through the nipple (HH), and then out of the
outlet box.

Continue feeding the cord and fixture ground
wire until there is no slack remaining.

Cut off any excess cord and fixture ground
wire, leaving 6in. extending from the outlet
box.

Split and separate the fixture cord and strip
off 3/8 in. of insulation from each wire.
6
Connecting the wires
If you have electrical questions
NOTE:
consult your local electrical code for
approved grounding methods.

Loop the fixture ground wire around the
ground screw located on the mounting bracket
(II) and leave 4 in. of wire extending from the
ground screw.

Tighten the ground screw against the
mounting bracket (II).

Connect the black supply wire to the smooth
fixture wire using a wire nut (BB).

Connect the white supply wire to the ribbed
fixture wire using a wire nut (BB).

Connect the fixture ground wire and the supply ground wire together using a wire nut (BB).

Wrap all wire connections with electrical tape for a more secure connection.

Carefully tuck all wire connections into the outlet box.
7