WARNINGS AND SAFETY
INSTRUCTIONS
Pay special attention to statements preceded by the
following words:
WARNING
Indicates a strong possibility of severe personal
injury or loss of life, if instructions are not followed.
CAUTION
Indicates a possibility of personal injury or equipment
damage, if instructions are not followed.
NOTE
Helpful information for correct function and use.
Operator safety
WARNING
This chain saw (TCS33EDTP) is designed
especially for tree care and surgery. Only
persons trained in tree care and surgery may
use this saw. Observe all literature, procedures
and recommendations from the relevant
professional organization. Failure to do so
constitutes a high accident risk. We recommend
always using a rising platform for sawing in
trees. Rappelling techniques are extremely
dangerous and require special training. The
operator must be trained in and familiar with
the use of safety equipment and working and
climbing techniques. Always use the restraining
equipment for both the operator and the saw.
○ Always use the gloves to reduce the effects of
vibration.
○ Always wear a safety face shield or goggles.
○ Gloves should be used when sharpening chain.
○ Always wear safety protective equipment such as
jacket, trousers, gloves, helmet, boots with steel
toe-caps and non-slip soles whenever you use a
chain saw. For working in trees the safety boots
must be suitable for climbing techniques. Do not
wear loose clothing, jewelry, short pants, sandals
or go barefoot.
Secure hair so it is above shoulder length.
○ Do not operate this tool when you are tired, ill or
under the infl uence of alcohol, drugs or medication.
○ Never let a child or inexperienced person operate
the machine.
○ Wear hearing protection. Pay attention to your
surroundings.
Be aware of any bystanders who may be signaling
a problem.
Remove safety equipment immediately upon
shutting off engine.
○ Wear head protection.
○ Never start or run the engine inside a closed room
or building.
Breathing exhaust fumes can kill.
○ For respiratory protection, wear a protection mask
while emitting the chain oil mist and dust from
sawdust.
○ Keep handles free of oil and fuel.
○ Keep hands away from cutting equipment.
○ Do not grab or hold the unit by the cutting equipment.
○ When the unit turned off, make sure the cutting
attachment has stopped before the unit is set down.
○ When operation is prolonged, take a break from time
to time so that you may avoid possible Hand-Arm
Vibration Syndrome (HAVS) which is caused by
vibration.
○ The operator must obey the local regulations of
cutting area.
WARNING
○ Anti-Vibration systems do not guarantee that you will
not sustain Hand-Arm Vibration Syndrome or carpal
tunnel syndrome.
Therefore, continual end regular users should
monitor closely the condition of their hands and
fi ngers. If any of the above symptoms appear, seek
medical advice immediately.
○ Long or continuous exposure to high noise levels
may cause permanent hearing impairment. Always
wear approved hearing protection when operating
a unit/machine.
○ If you are using any medical electric/electronic
devices such as a pacemaker, consult your
physician as well as the device manufacturer prior
to operating any power equipment.
Unit/machine safety
○ Inspect the entire unit/machine before each use.
Replace damaged parts. Check for fuel leaks and
make sure all fasteners are in place and securely
tightened.
○ Replace parts that are cracked, chipped or damaged
in any way before using the unit/machine.
○ Make sure the side case is properly attached.
○ Keep others away when making carburetor
adjustments.
○ Use only accessories as recommended for this unit/
machine by the manufacturer.
○ Never let the chain strike any obstacle. If the chain
makes contact, the machine should be stopped and
checked carefully.
English
5