Publicidad
Idiomas disponibles
Idiomas disponibles
Installation instructions - Audi A4 (8W) Avant 2016 ►
Edition 07.2015
WARNING
Never exceed:
◆ the maximum permissible roof load (90 kg/198 lbs.)
◆ the gross axle weight rating
◆ the gross vehicle weight rating for your vehicle
hicle Owner's Manual.
4.6
Adjusting the carrier unit width
Instructions for the qualified workshop if the position of the
support bracket for the relevant vehicle is not set correctly.
– Install the carrier unit on the vehicle ⇒ P age 7 and only tight-
en gently on the left-hand side.
– Use a 5-mm hexagon socket wrench to unscrew the hexa-
gon bolts on the right-hand support bracket far enough that
the support bracket can be moved. The carrier unit remains
on the vehicle during this process.
– Adjust the carrier unit -arrows A- so that the rubber supports
for the right-hand lower support bracket -7- sit flush with the
roof rail -arrows B-.
The carrier unit is seated in the correct position if:
◆ The rubber supports for the lower support bracket -7- sit
flush against the roof rail -arrows-.
◆ The pins in the pin links-5- engage in the holes -X- in the
roof rail.
◆ The claw fastener -10- is hooked under the roof rail.
14
4 Installing/removing the carrier units
⇒ Ve-
Publicidad
