NEXPEAK NC101 PRO Manual Del Usuario página 8

Troubleshooting
1. The screen does not display when the charger is connected to the battery?
Reason: The positive and negative clips are connected incorrectly or the battery is dead.
Solution: Check whether the clips are connected reversed, use a battery tester to see
whether the battery is dead or not.
2. Screen will display the voltage but don't charge the battery
Reason: there is no input voltage.
Solution: Connect to a 110-220V AC socket.
3. The battery can't be charged and is low current, but the screen display (FUL)
indicates fully charged.
Reason: This is caused by the battery's vulcanization and inside lack of water, low
voltage or leave it unused for a long time. The internal resistance of the battery and
capacity will reduce greatly, Then it will reach full voltage quickly while charging.
Solution: Choose repair mode to reactivate the battery!
4. Can't fully charged after a long time.
Reason: battery vulcanization or lack of water also low voltage can lead to this
situation, the battery will become hot while charging.
Solution: Stop charging. Check whether the battery liquid was leaked if it's a wet
battery.
5. Tried charging a battery overnight for over 8 hours and no charge at all, kept
blinking the battery percentage icon all night long.
Reason: battery charger can not charge totally dead batteries(0V or bad cells
contained).
Solution: try repair function or replace this battery directly.
2 Year Hassle-Free Warranty
NEXPEAK warrants that this product will be free from defects in material and
workmanship for a period of two (2) years from the date of purchase
(the "Warranty Period" ). For defects reported during the Warranty Period, NEXPEAK
will, at its discretion, and subject to NEXPEAK's technical support analysis, either
repair or replace defective products. Replacement parts and products will be new or
serviceably used, comparable in function and performance to the original part and
warranted for the remainder of the original Warranty Period.
NEXPEAK'S LIABILITY HEREUNDER IS EXPRESSLY LIMITED TO REPLACEMENT
OR REPAIR. TO THE MAXIMUM EXTENT PERMITTED BY LAW, NEXPEAK SHALL
NOT BE LIABLE TO ANY PURCHASER OF THE PRODUCT OR ANY THIRD PARTY
FOR ANY SPECIAL, INDIRECT, CONSEQUENTIAL OR EXEMPLARY DAMAGES,
INCLUDING, BUT NOT LIMITED.
Contact us: support@nexpeaktech.com
Web: www.nexpeaktech.com
EN - 7