Descargar Imprimir esta página

Parkside PRPA 20-Li B2 Traduccion Del Manual De Instrucciones Originale página 10

Bomba recargable para depósitos de aguas pluviales 20 v

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 96
Additional safety instructions
If there is a risk of flooding, make sure that the
cordless rain barrel pump is set up in an area
that is safe from flooding.
Do not use any accessories that are not recom-
mended by PARKSIDE. This can lead to an
electric shock or fire.
Rechargeable batteries must be removed from
the appliance before charging.
If the appliance is going to be stored for a long
period and not used, the battery must be re-
moved.
Do not leave the appliance outside if there is a
danger of frost.
Safety guidelines for battery chargers
This appliance may be used by
children aged 8 years and
above and by persons with limit-
ed physical, sensory or mental
capabilities or lack of experience
and knowledge, provided that
they are under supervision or
have been told how to use the
appliance safely and are aware
of the potential risks.
Do not allow children to play
with the appliance. Cleaning
and user maintenance tasks may
not be carried out by children
unless they are supervised.
To avoid potential risks, a dam-
aged mains cable should be re-
placed by the manufacturer or
the manufacturer's customer ser-
vice department or a similarly
qualified person.
PRPA 20-Li B2
The charger is suitable for indoor use only.
WARNING!
To avoid potential risks, a damaged mains
cable should be replaced by the manufactur-
er or the manufacturer's customer service
department or a similarly qualified person.
Before use
Charging the battery pack (see fig. A)
CAUTION!
Always unplug the appliance before you re-
move the battery pack j from or connect it
to the charger.
NOTE
Never charge the battery pack at an ambient
temperature of below 10°C or above 40°C. If
a lithium-ion battery is to be stored for an ex-
tended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The storage climate
should be cool and dry and the ambient tem-
perature should be between 0°C and 50°C.
Connect the battery pack j to the high-speed
battery charger s (see fig. A).
Insert the mains plug into the mains socket. The
control LED g lights up red.
The green control LED h indicates that the
charging process is complete and the battery
pack j is ready for use.
ATTENTION!
If the red control LED g flashes, this means
that the battery pack j has overheated and
cannot be charged.
If the red and green control LEDs g h both
flash, this means that the battery pack j is
defective.
Switch off the charger for at least 15 minutes
between successive charging sessions. Also
disconnect the power plug from the mains pow-
er socket.
GB │ IE
 5

Publicidad

loading