VEVOR HL-60ft-001 Manual De Usuario página 85

7.Turn the stainless steel turnbuckles by hand to tighten the whole
line.To prevent loosening, you can use a wrench to tighten it.
8.Open the handle pulley and place it at the starting point of the track.
Hang the seat and adjustable strap on the handle pulley with the locking
buckle.
9.Adjust the seat to the length you need.
You can adjust it to the most suitable length through the buckle on the top
or the knot on the bottom.
10.Put the safety belt on your body and tighten it.
Then connect the safety belt to the adjustable strap with another buckle.
(at the same time,please check that the adjustable belt and handle pull
have been reliably connected.)
Note:when you finish installing the zip line kit,it is recommended
that you have them tested. Take care to reduce the probabilities
of injury.
We sincerely hope you enjoy your zip line kit as much as possible.
- 7 -