MOB MO2145 Manual Del Usuario página 2

MO2145
EN
Magnetic wireless charger
Instructions:
1. Connect the wireless charger with suitable power supply by
using the Type-C charging cable provided. Recommend ed
rating 9V/3A, minimum 9V/2A, charging speed varies based on
power input and number of devices being recharged.
2. Place the mobile device in the centre of the wireless charging
receiver to start charging.
Note: A minimum 9V/2A input is required for 15W wireless output,
if below 9V input only 5W wireless output is achievable. 9V/3A
output adapter is required if charger is to be used for 3 charging
devices simultaneously. The charging speeds may vary per device
and dependent on the type of power source employed .
Indication lights:
After power is connected the red light is turned on, the charger is in
standby mode. When the blue light is on , this indicates the device
is being charged. If there are metal objects on top of the charging
surface, the blue and red lights will flash alternately.
(Two indication lights do not represent the charging status of Apple
Watches. Please check the display of the Apple Watch during
charging.)