Mora MRF266N6CSE Guía De Uso Y Cuidado página 9

Door Removal
In case your home access door is too
narrow for the refrigerator to pass
through, remove the refrigerator doors
and drawers. If you do not need to
remove the appliance doors, proceed
to 'Installing Water Lines' on page 10.
If you need to remove the doors,
continue below.
Tools you will need(Not provided)：
Allen Wrench (5/32",4mm)
Philips Screwdriver
With the door closed, remove the 3 screws
1.
holding the top cover (A) with Philips (+)
screwdriver, and then remove the top
cover with the entireharness attached.
2. Remove the screws (B) fixed on the hinges
with a wrench (5/16",8mm) and 1 ground
screw (C) attached to the hinge with
Philips (+) screwdriver. Remove the upper
left and right door hinges (D).
C
B
D
Wrench (5/16",8mm)
A
3. Use both hands to open the door more
than 90°. Lift it up and take it off.
4. Remove the 4 hex head bolts hinges (E)
with an Allen wrench (5/32",4mm).
Remove the lower left and right door
hinges (F).
F
E
Disassembling the freezer door
1. Pull out the freezer door and the upper
freezer drawer (G) to the final position.
G
9