Special Safety Instructions - Mx Onda MX-AS2048 Manual De Instrucciones

If the air inlet of the cordless vacuum cleaner or the detachable accessories are clogged, switch the
vacuum cleaner off immediately. Before you switch the vacuum cleaner again, remove the clogged
objects.
1. Do not use the vacuum cleaner in the immediate proximity to sources of heat and do not suck
up hot objects, e.g. cigarette butts or ashes.
2. Always connect the power plug with the socket with dry hands.
3. Before you start using the vacuum cleaner, first remove big or sharp object from the floor in
order to avoid possible damages.
4. When disconnecting the power plug, do not pull the cord.
Caution!
Do not let children play with the packaging material – there is danger of suffocation.
Before mounting or dismounting the device or the accessories, always disconnect the power plug
of the net adaptor from the socket first!
Mounting on the wall
The cordless vacuum cleaner is supplied with a wall holder. Select a suitable place for the holder.
It should be located in a dry place, close to a socket.
Caution!
Before mounting or dismounting the device or the accessories, always disconnect the power plug
of the net adaptor from the socket first!
1. Place the wall holder as well as fastening devices on the floor or a table and check them for
possible damages.
2. Hold the wall holder on the selected place and mark the drilling holes with a pencil.
3. Mount the wall holder with the corresponding screws and wall plugs.
4. If the jack plug has not already been attached to the wall holder, place it in the corresponding
holder.

Special Safety Instructions

Operation
4